AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Camera lcd screen shade1/25/2024 The still existing façade drawings show the columns with arches on the ground floor and that are fitted between a long strip of windows with excessive pilasters. Once again, it was Jean Schmidt, who prepared the plans for a first seven-story skyscraper. The space between the two skyscrapers (which originally had been provided with subsequent buildings) had to be closed by another building in the early 1930s. In the ten-axis building, similar to the oldest skyscraper, the lower levels are grouped by pilasters. Again, the original plan, which provided a horizontal structure of the building through the cornucopia, was abandoned in favor of a simpler façade design. The basement building was made of reinforced concrete with brick stairs. After the planning of Jean Schmidt, contractor Robert Schneider built a four-story building in 1911. Only a few years later, Leitz again demanded the construction of a tall building. The mansard's floor expanded as production and workers also increased. On either side of the central building there was a hip roof with high ceilings. The fourth floor is visually separated from the lower part of the building by a very distant cornice. Narrow wall patterns and lightly embedded parapets summarize the three lowest floors. The four-story building is divided into six groups of windows, each of which has three windows. However, in the same year, it was decided to use the new construction of concrete skeletons and a simpler façade design. The first plans of the architect Jean Schmidt in 1907 show a brick building on a stone base, which was covered by a sloping roof and a slate roof. ![]() The oldest part of this row of tall buildings is now hidden by a new building at the Schützenstraße. In the last decades of the 19th century, Ernst Leitz moved its production facilities to the slopes of Kalsmunt with sufficient residential buildings and workshops on the Laufdorfer Weg.Īt the turn of the century, the production of optical devices expanded so much that it originated the first skyscrapers in the city of Wetzlar. The Wetzlar factory was located on the opposite side of the administrative building of 1957 and formed a special urban architecture it is upstream from the slope of Kalsmunt and forms a structurally attractive graduation from the skyscrapers to the ruins of Kalsmunt Castle. ![]() Leica Camera AG is 55% owned by Austrian investment firm ACM Projektentwicklung GmbH, and 45% owned by The Blackstone Group which licenses the Leica brand name from the Danaher Corporation-owned Leica Microsystems GmbH.įrom the year 1907 to the 1950s, the buildings that formed Leica factory were built on Ernst Leitz Street in Wetzlar, and remained until 1986, when the factory was moved to the city of Solms. ![]() At this time, Leica relocated its factory from Wetzlar to the nearby town of Solms. The name Leica is derived from the first three letters of the founder's surname (Leitz) and the first two of the word camera: lei-ca (LEItz CAmera). In 1986, the Leitz company changed its name to Leica, due to the fame of the Leica trade-name. The company was founded by Ernst Leitz in 1869 ( Ernst Leitz Wetzlar), in Wetzlar, Germany. Leica Camera AG ( / ˈ l aɪ k ʌ/) is a German company that manufactures cameras, optical lenses, photographic lenses, binoculars, rifle scopes and microscopes. There is no guarantee this app will run on all devices.First image taken from the Ur-Leica by Oskar Barnack 1913, Eisenmarkt, Wetzlar, Germany Make sure your camera's firmware is updated to the current version. Images downloaded to the smart device with version 1.x will no longer be displayed in the Gallery after you upgrade to version 2, but can be viewed in the “Photos” app provided with the smart device. The Nikon SnapBridge application must be installed on the device before it can be used with this camera.Īndroid 6.0, 6.0.1 or later, 7.0 or later, 8.0 or later, 9.0 or later, 10Ī device with Bluetooth ® 4.0 or later (i.e., a device that supports Bluetooth Smart Ready/Low Energy) is required. This camera’s built-in Wi-Fi ® capability can only be used with a compatible iPhone ®, iPad ®, and/or iPod touch ® or smart devices running on the Android ™ operating system.
0 Comments
Read More
Leave a Reply. |